Multiband half-wave dipole 100W 10/12/15/17/20/30/40/60/80m
Small size and weight
Resonance traps are small (70mm / 40mm), the line used weighs only 4g / 1m and is resistant to stretching and breaking up to 35 kg. This is a very good transport and operational performance for field antennas. The folded antenna has a very small size. You can put it in your backpack.
- Total length dipole 1 – 26,2m
- Total length dipole 2 – 20m
- Power: 100W SSB, CW, 50W DIGI
- Work bands dipole 1: 10/20/40/80M
- Work bands dipole 2: 12/15/17/30/60M
- Dimensions of resonance traps: 70mm x 40mm
- Resonance traps protected with varnish
- The set is assembled, ready to work
You can choose
Antenna operating bands
This antenna works on most HF bands available in Europe. It consists of two dipoles that you can use independently.
The traps used in the antenna divide it automatically into half-wave segments on each band. To minimize losses, their resonant frequency has been set outside the frequency of each band. Resonance traps are protected with varnish
Tuning the antennas
Tuning clamps are used in the resonance traps (you can use them or not). Thanks to them, you can quickly tune the antenna to the DIGI or CW band. Short tuning cables of sufficient length are enough and you can easily add them to any antenna band.
THE KIT INCLUDES:
BALUN 1: 1 YOU CAN CHOOSE
You can select the BalUn version in the options.
Portable, light version (painted with varnish) without housing or in a waterproof housingPL2 bez obudowy
Core: FT 140-43
Core wire: 22AWG, Silver plated copper, PTFE isolation
RESONANCE TRAPS 100W
Protected with varnish. Each resonant trap has a tuning clamp for each band. The set includes reusable clamps for winding the antenna.
KEVLAR-REINFORCED ANTENNA WIRE
38 meters of reinforced antenna wire 1.5mm outer diameter
ANTENNA ISOLATOR WITH ANTENNA TUNING OPTION
2 pcs. HFD antenna isolator with the possibility of tuning the antenna
They are used to wind up the antenna